Home › Mowers

Tree Shredders

Magnum Mulcher

Tree Mulcher for Skid Steer Loaders

  • patent-pending rotor design
  • patent-pending reversible hammer to reduce replacement costs
  • low profile design weighing 2,200 lbs
  • includes hydraulic front deflector door and hydraulic sight pressure gage
  • 45 cutting hammers on the rotors can be changed with an impact wrench in less than 45 minutes
  • rotor operates at 2,000 RPM and has a four second recovery time from a dead stall stop
  • two cutting hammer designs that are both available in single as well as reversible

TimberAx Extreme Hydraulic-drive

  • For a Variety of Prime Movers up to 300 HP.
  • Efficiently Cuts & Mulches Up to 10" Diameter Material With Reserve Capacity for Larger Diameter Material.
  • Cuts Trees, Brush or Grass with Same Knives.
  • Twin Hydraulic Drive Motors
  • VOAC Bent-axis Piston Motors
  • 60-100 GPM / up to 6000 PSI
  • Heavy-duty Overhung Bearing Blocks
  • Barko Mount Included
  • Adjustable Tree-pusher Bar
  • Claw Hooks on Pusher Bar
  • 1300 rpm - 21 inch Diameter Rotor
  • 1" Thick, Heat-treated, Sharpened Blades
  • Rigid, Pocket-style Knife Mounts
  • Adjustable Shear Bar
  • “Hardox” Swedish Steel Body & Rotor
  • 3" Piloted, Double-tapered, Roller Bearings
  • Bearing Anti-wrap Protection
  • Steel Deflector Chains
  • 6-Groove Banded Belts
  • Dual Belt Dri

Carbide Cutter G2

Tree & Brush Cutter for Skid-steers

NEW Generation 2!

Selectively cuts trees and brush without expensive hand labor. The material can be rough-cut or finely processed to fit your job requirements.

Works on a Minimum of 48 Hydraulic Horsepower

Aggressively cuts & mulches up to 6 inch diameter material with as little as 48 hydraulic horsepower (36 kw). Intermittently cuts up to 10 inch (25 cm) or larger diameter material.

Note: Production rate will vary depending on the actual hydraulic horsepower available. A flow and pressure test is strongly recommended on your power unit before selecting a TimberAx model. Hydraulic Horsepower = Flow x Pressure x .90 ÷ 1714

The special body shape and hitch angle provide all the benefits of a moving door, without the hassle.

TimberAx

Tree & Brush Shredder for Skid-steers

TimberAx Extreme - PTO Drive

Tree & Brush Shredder for Tractors

Efficiently cuts & mulches up to 10 inch diameter material with reserve capacity for larger diameter material.

Cuts trees, brush or grass with same knives.

Rotating pivot mechanism allows head to rotate 120 degrees without affecting PTO angles.

Special Models for the New Holland TV 140 & TV 145 Bi-directional Tractors.

Tree Hammer 360

Light Tree Cutter

The new Medium-duty Tree Hammer 360 design will be rated for 4 inch diameter trees & brush with reserve capacity to handle larger material if needed.

It will have swinging hammers that will be able to rotate in a 360 degree circle into a pocket in the rotor.

The hammers will be heat-treated and will not require sharpening.

The new design will have carbide cutter looking body with downward rotation.

Carbide Cutter Extreme PTO-drive

PTO-drive Tree & Brush Cutter

Designed for Reverse Platform or Bi-directional Tractors - 160 Horsepower Maximum

Efficiently Cuts & Mulches Up to 10 inch Diameter Material Intermittently Cuts Larger Diameter Material Cuts Trees or Brush with Same Teeth

Rotating pivot mechanism allows head to rotate 120 degrees without affecting PTO angles.

  • Tractor-mounted, 1000 RPM PTO-driven
  • Category II or III Three-point Hitch

    • If you need a quote or would like more information on one of our products then try out the request information page. Or you can call us toll free at **1-888-317-5878**.

    Syndicate content