• Regular and heavy duty versions.
• Available with center window cut-out or 8 plug weld holes.

• Adjustable skid shoes
• 5/8" x 8" reversible wear edge
• 2 cylinder hydraulic angle, one cylinder tilt
• Heavy duty frame with 5/16" thick moldboard
• Hydraulic angle and tilt by the use of an electric valve and one loader valve
• Uses either loader electrical control system or add on electrical control

Recommended for loaders with operating capacities greater than 1800 lbs.

Features

• Can operate broom forward and reverse
• Direct drive design with replaceable drive components
• Standard 5/8" x 6" bolt on reversible wear edge
• Standard with 26" diameter poly/wire brush wafers , all poly and all wire available

Benefits

• Designed for easy exchange of wafers, no disconnecting of hydraulic hoses
• Hood frame adjusts for bristle wear
• Optional gutter brush available

Recommended for loaders with operating capacities greater than 1500 lbs.

Features

• Direct drive design with replaceable drive components
• 160 degree hood
• Hydraulic pressure relief valves on motor allows broom to operate in both directions
• Standard with 32" diameter poly/wire brush wafers, all poly and all wire available

Benefits

• Centering swing linkage better centers broom in front of loader when angled
• Designed for easy exchange of wafers, no disconnecting of hydraulic hoses
• Broom is standard with manual angle, hydraulic angle with electric control optional

Features

• 3/4" x 6" edge with holes to accept optional bolt on edge
• Windows in bucket for increased visibility
• Machine specific hydraulic package

Benefits

• Increased vertical lift by approximately 44"
• Increased horizontal reach by approximately 13"
• Ideal for loading feed mixers and trucks

Recommended for loaders with operating capacities greater than 1800 lbs.

Features

• Constructed of high strength steel
• Fully gusseted tine tips
• Designed for maximum visibility

Benefits

• Light weight quality construction
• Open design allows dirt to fall through bottom while digging
• Two unique features hold rocks in bucket while digging

Recommended for loaders with operating capacities less than 1500 lbs.

Features

• 3/4" x 6" edge with holes to accept optional bolt on edge
• Reversible, replaceable bolt on side wear edges
• Top formed profile to limit spillage

Benefits

• 60 degree back angle to hold in slurry material
• Rolled inside profile for better clean out
• High strength steel construction

Recommended for loaders with operating capacities greater than 1500 lbs.

Features

• Heavy duty two cylinder grapple
• Large jaw opening allows handling of big round bales
• 3/4" x 6" edge with holes to accept optional bolt on edge

Benefits

• Curved jaw teeth penetrate bales with minimal damage to bale
• High strength steel construction

Recommended for loaders with operating capacities greater than 2400 lbs.

Features

• Heavy duty two cylinder grapple
• Large jaw opening allows handling of big round bales

Benefits

• Curved jaw teeth penetrate bales with minimal damage to bale
• See through design allows for excellent visibility
• Open bottom allows debris to fall through

Recommended for tractors with less than 150 horsepower.