• Fits all 2 cylinder grapples from Virnig

1 Cylinder

• 6,000 lb. Tines
• 48" or 60" Tine Length
• T-Bar hits tines at 46"
• 24" Clearance at rear of forks
• 53" Wide

2 Cylinder

• 6,000 lb. Tines
• 48" or 60" Tine Length
• Arm outside of frame
• Arm reaches end of 48" Tine
• 65" Wide

4 Cylinder

• 6,000 lb Tines
• 48" Tine Length
• Arm outside of frame
• Designed for two (2) 12" or one (1) 24" casing pipe

• Single cylinder and dual cylinder models
• Hydraulic system rated at 3500 PSI
• Telescoping mount system fits various width and style buckets
• Machine specific hydraulic package
• Optional "cylinder guards" available on two cylinder model
• Easily converts existing buckets into grapple attachments
• No cutting or welding required to install
• Low cost alternative for a grapple bucket

Features

• High tensile strength removable, replaceable teeth
• Machine specific hydraulic package

Benefits

• Can be used to handle a variety of materials, including manure, brush, debris, etc
• Bucket configuration designed for easy cleanout and bulk material penetration Utility Fork also available without Grapple

•  
• Designed to fit a wide range of skid-steer, farm, and utility loaders
• Provide good visibility
• May lose hay and manure
• Ideal for moving brush and small branches

• Ideal for brush and refuse removal; load loose material leaving dirt behind
• Grapples work independently to handle uneven loads
• Wear resistant Pacal steel tapered cutting edge
• 2.25" x 38.75" round tines
• 1/4" thick wear pads
• 1/4" reinforced back plate
• Cylinders: 2" bore x 8" stroke
• Hardened sleeves at pivot points

Designed for easy handling of scrap pallets and yard waste in recycling applications. Designed for tub grinder charging. Adapts to 6,000 lb. (2722 kg.) capacity material handlers and loaders with greater lift capacity. Open tines allow dirt to drop out, which increases tub grinder life.

Available for agricultural tractors, telescopic handlers wheel loaders and backhoe loaders.

• Full Floating Pin Design Allows for Easy Pick-Up Of Material on Uneven Surfaces
• Capacities from 5,000 to 21,000 Lbs (Most Carriages Designed Around a 10,000 Lb Spec)
• Designed for Telehandlers, Compact Wheel Loaders, & TLB’s with Quick Attach Systems
• High Back Fork Design for Down Pressure on Fork Tips to Help Single Out Loads
• Capacity of 10,000 Lbs
• Designed for Telehandlers, Wheel Loaders, & TLB’s with Quick Attach System
• Ideal Attachment for the Logging Industry, Sawmills, Pallet Mills, and Applications Where Material Must Be Secured While Traveling
• Can Be Used to Pick Up Pallets When the Grapple Arms are Raised

• Front support fully gussets tines to tips.
• Designed to scrape with loader arms against boom stops.
• Machine specific hydraulic package.
• See through design allows for excellent visibility.
• Open bottom and back allows dirt to fall through.
• One cylinder grapple provides a lower cost, versatile grapple attachment.

• Bushings at all pivot locations
• Machine specific hydraulic package
• Design allows complete protection of hydraulic hose routing
• Two cylinder independent grapple
• Curved design allows efficient gathering and piling of material
• Cylinder guards standard
• See through design allows for excellent visibility
• Large jaw opening
• Clamps tightly to securely hold small objects