Home

Mowers

Brush Cutter

  • 60”, 72” & 78” heavy-duty deck widths with heavy duty optional foam filled caster wheel to fit most extreme applications.
  • High flow and standard flow available.
  • Heavy-duty 1/4” thick high strength steel deck with formed stiffened side plates and heavy-duty skid shoes for added strength and rigidity.
  • Motor options for 25-40 GPM flow with internal relief for drive system protection and fast controlled shut down.
  • High-speed, dual rotation blades, for brush and small trees up to 4” in diameter (blade options available).
  • Stump jumper for ease of operation and gear box protection.
  • 1 year warranty

Magnum Mulcher

Tree Mulcher for Skid Steer Loaders

  • patent-pending rotor design
  • patent-pending reversible hammer to reduce replacement costs
  • low profile design weighing 2,200 lbs
  • includes hydraulic front deflector door and hydraulic sight pressure gage
  • 45 cutting hammers on the rotors can be changed with an impact wrench in less than 45 minutes
  • rotor operates at 2,000 RPM and has a four second recovery time from a dead stall stop
  • two cutting hammer designs that are both available in single as well as reversible

Rotary Brush Cutter

Features

  • Four motor options available to match loader's hydraulic system
  • Three blade cutting system, mounted to a large circular flywheel
  • Standard dual hydraulic pressure relief valves with dynamic braking

Benefits

  • Heavy duty construction for pushing over brush and small trees
  • Standard replaceable front skid shoes
  • Optional rear roller compacts chopped material and prevents rear of deck from gouging into soil

Recommended for loaders with operating capacities greater than 1500 lbs.

Crop Shredders - Fully-Mounted

12'-30' Fully-Mount Crop Shredders

Fully-mounted crop shredders are designed to be used with category 2 or 3 tractors equipped with a quick-hitch. Rigid rear wheels are most common, however, units may be equipped with rear swivel wheels. Ratchet jacks are usually all that is needed for the rear lift mechanism.

  • 280 HP Gearbox & Driveline
  • 2 3/16 inch Main Rotor Bearings
  • 1/4 inch Thick Hood
  • Curved HoodRe-cutter Bar
  • Structural Steel Tube Frame
  • Computer Balanced Rotors
  • Over-running Clutch
  • Steel Deflector Shields
  • Line-shaft Universal Joints
  • Line-shaft Bearings
  • Dual Split Rotor Design
  • Exclusive Rotor-locking Device
  • Banded Belts
  • Spring-loaded Idler
  • Remote Grease Tube

    • TimberAx Extreme Hydraulic-drive

    • For a Variety of Prime Movers up to 300 HP.
    • Efficiently Cuts & Mulches Up to 10" Diameter Material With Reserve Capacity for Larger Diameter Material.
    • Cuts Trees, Brush or Grass with Same Knives.
    • Twin Hydraulic Drive Motors
    • VOAC Bent-axis Piston Motors
    • 60-100 GPM / up to 6000 PSI
    • Heavy-duty Overhung Bearing Blocks
    • Barko Mount Included
    • Adjustable Tree-pusher Bar
    • Claw Hooks on Pusher Bar
    • 1300 rpm - 21 inch Diameter Rotor
    • 1" Thick, Heat-treated, Sharpened Blades
    • Rigid, Pocket-style Knife Mounts
    • Adjustable Shear Bar
    • “Hardox” Swedish Steel Body & Rotor
    • 3" Piloted, Double-tapered, Roller Bearings
    • Bearing Anti-wrap Protection
    • Steel Deflector Chains
    • 6-Groove Banded Belts
    • Dual Belt Dri

    Carbide Cutter G2

    Tree & Brush Cutter for Skid-steers

    NEW Generation 2!

    Selectively cuts trees and brush without expensive hand labor. The material can be rough-cut or finely processed to fit your job requirements.

    Works on a Minimum of 48 Hydraulic Horsepower

    Aggressively cuts & mulches up to 6 inch diameter material with as little as 48 hydraulic horsepower (36 kw). Intermittently cuts up to 10 inch (25 cm) or larger diameter material.

    Note: Production rate will vary depending on the actual hydraulic horsepower available. A flow and pressure test is strongly recommended on your power unit before selecting a TimberAx model. Hydraulic Horsepower = Flow x Pressure x .90 ÷ 1714

    The special body shape and hitch angle provide all the benefits of a moving door, without the hassle.

    TimberAx

    Tree & Brush Shredder for Skid-steers

    TimberAx Extreme - PTO Drive

    Tree & Brush Shredder for Tractors

    Efficiently cuts & mulches up to 10 inch diameter material with reserve capacity for larger diameter material.

    Cuts trees, brush or grass with same knives.

    Rotating pivot mechanism allows head to rotate 120 degrees without affecting PTO angles.

    Special Models for the New Holland TV 140 & TV 145 Bi-directional Tractors.

    Flail Mower - Skid Steer

    Destroys and Mulches Grass or Weeds and Cuts Brush up to 3/4 inch (2 cm)

    Advantages

  • Front-mounted, Skid-steer Hydrostatic Drive
  • Cuts Brush, Weeds or Grass with Same Knives
  • Leaves an Even Mat of Mulch for Faster Decomposition
  • Three Sizes to Choose From: 60, 72 & 90 inch (152, 213 & 228 cm)

    • Flail Mower - Tractor Mounted

    Tractor Flail Mower Cuts Grass or Weeds, and Cuts up to 3/4 inch (2 cm) Diameter Brush with the Same Knives

  • Destroys and Mulches Grass or Weeds and Cuts Brush up to 3/4 inch (2 cm) in Diameter
  • Mower Leaves an Even Mat of Mulch for Faster Decomposition
  • Four Sizes to Choose From: 48, 60, 72 & 90 inch (1.22, 1.52, 2.13 & 2.28 m)

    • If you need a quote or would like more information on one of our products then try out the request information page. Or you can call us toll free at **1-888-317-5878**.

    Syndicate content