Home

Forks

Mini Pallet Forks

Mini Pallet Forks
  • 32" & 42" tine lengths.
  • Adjustable tine widths.
  • Maximum lift capacity 900 lbs.
  • Heavy-duty, easy on and off.

Pipe and Pole Grapple

Pipe and Pole Grapple

1 Cylinder

  • 6,000 lb. Tines
  • 48" or 60" Tine Length
  • T-Bar hits tines at 46"
  • 24" Clearance at rear of forks
  • 53" Wide

2 Cylinder

  • 6,000 lb. Tines
  • 48" or 60" Tine Length
  • Arm outside of frame
  • Arm reaches end of 48" Tine
  • 65" Wide

4 Cylinder

  • 6,000 lb Tines
  • 48" Tine Length
  • Arm outside of frame
  • Designed for two (2) 12" or one (1) 24" casing pipe

Bolt-On Grapple

Bolt-On Grapple

Features

  • Single cylinder and dual cylinder models
  • Hydraulic system rated at 3500 PSI
  • Telescoping mount system fits various width and style buckets
  • Machine specific hydraulic package
  • Optional "cylinder guards" available on two cylinder model

Benefits

  • Easily converts existing buckets into grapple attachments
  • No cutting or welding required to install
  • Low cost alternative for a grapple bucket

Utility Fork With Grapple

Utility Fork With Grapple

Features

  • High tensile strength removable, replaceable teeth
  • Machine specific hydraulic package

Benefits

  • Can be used to handle a variety of materials, including manure, brush, debris, etc
  • Bucket configuration designed for easy cleanout and bulk material penetration Utility Fork also available without Grapple

Skeleton Utility Fork

Skeleton Utility Fork

Features

  • Constructed of high strength steel
  • Tines gusseted to the tips
  • Various widths available

Benefits

  • Tapered tines easily penetrate piles
  • Bottom gusset plate acts as a large skid plate on hard surfaces

Manure Forks (Optional Grapple)

Manure Forks (Optional Grapple)

Features

  • Designed to fit a wide range of skid-steer, farm, and utility loaders
  • Provide good visibility
  • May lose hay and manure
  • Ideal for moving brush and small branches

    • Forked Scrap Grapple

    Forked Scrap Grapple
    • Ideal for brush and refuse removal; load loose material leaving dirt behind
    • Grapples work independently to handle uneven loads
    • Wear resistant Pacal steel tapered cutting edge
    • 2.25" x 38.75" round tines
    • 1/4" thick wear pads
    • 1/4" reinforced back plate
    • Cylinders: 2" bore x 8" stroke
    • Hardened sleeves at pivot points

    Pallet Forks, Railstyle

    Pallet Forks, Railstyle

    Features

  • Solid rails add strength and durability
  • Brick guard is standard
  • Forks lock into position with user-friendly pin clip assemblies
  • Block tines can easily replace pallet tines

    • Pallet Forks

    Major Pallet Forks
  • Cubing or Block Tines, Brick Forks, Standard Chisel Low Back and High Back Styles and Negative Drop Forks
  • Capacities from 6860 Lbs to 21,000 Lbs
  • Tines Available in 48”, 60”, 72”, 84”, & 96” Lengths
  • Three Styles Available ITA Forks or Pallet Tines, Floating Pin, or Block Tines or Cubing Tines

    • Skeleton Grapples

    Skeleton Grapples

    Designed for easy handling of scrap pallets and yard waste in recycling applications. Designed for tub grinder charging. Adapts to 6,000 lb. (2722 kg.) capacity material handlers and loaders with greater lift capacity. Open tines allow dirt to drop out, which increases tub grinder life.

    Available for agricultural tractors, telescopic handlers wheel loaders and backhoe loaders.

    If you need a quote or would like more information on one of our products then try out the request information page. Or you can call us toll free at **1-888-317-5878**.
    Syndicate content